125315, Moscow, Chasovaya 24, 2
Vacuum resistance electric furnaces type SNVE-1.3.1/16 I4
Designed for various thermal processes in vacuum (annealing, degassing, sintering) at a temperature of 1600 °C.
- Description
- Characteristics
- Additional information
Designed for various thermal processes in vacuum (annealing, degassing, sintering) at a temperature of 1600 °C. It is allowed to work in an environment of neutral gases of increased frequency at an overpressure of not more than 0.02 MPa (0.2 kgf/cm2). Thermal processes are carried out both in manual and automatic mode, performed on the basis of the Proterm microprocessor.
The electric furnace is designed for operation in moderate climate conditions at temperatures from 5 to 35 °С, relative air humidity not higher than 80% at 20 °С and not more than 50% at 35 °С ; in an explosive environment that does not contain aggressive gases and vapors, is not saturated with water vapor and conductive dust.
| Setting power | kW | 20 |
| Rated power (chamber heating) | kW | 18 |
| Rated Temperature | °C | 1600 |
| Workspace Environment | ||
| Cold Residual Pressure Limit | Pa | 6.65×10 -3 |
| (mmHg) | (5×10 -5) | |
| Workspace Size: | ||
| width | mm | 100 |
| length | mm | 300 |
| height | mm | 100 |
| Dimensions: | ||
| width | mm | 1450 |
| length | mm | 1800 |
| height | mm | 1850 |
| Cage Weight | kg | 15±0.3 |
| Rated mains voltage | In | 380/220 |
| Rated current frequency | Hz | 50 |
| Total installed heater resource | h | 800 |
| Number of phases | 1 | |
| Water consumption for cooling | m3/h | 0.8±0.1 |
| Stability of maintaining the nominal t° when heating is controlled by an automatic control system | °C | 5 |
| Electric oven weight | t | 0.95 |